The valve body is made of stainless steel, which has good corrosion resistance and oxidation resistance compared with ductile iron. It has a longer service life and high cost performance. The utility model has the advantages of simple structure, small size and light weight, and is convenient for installation and disassembly.
Body Material: Stainless Steel SS304, SS316
Disc Material: Stainless Steel SS304, SS316
Stem Material: Stainless Steel SS410, SS420
Seat: EPDM, PTFE Bolt: Stainless Steel SS201
Bushing: PTFE O-ring: EPDM, NBR
Drive: Handle, Gearbox, Pneumatic actuator, Electric actuator
End Connection: Flange, Wafer
1. It has simple structure, small size, short structure length, small volume and light weight.
2. When fully opened, the effective flow area of the valve seat channel is large and the fluid resistance is small.
3. It is convenient to open and close, and the flow characteristic is close to a straight line, with good adjustment performance.
4. The opening and closing torque is small, because the butterfly plates on both sides of the shaft are basically equal to the effect of the medium, and the direction of the torque is opposite, so the opening and closing is relatively labor-saving.
5. The sealing surface materials are generally rubber and polytetrafluoroethylene, so the low pressure sealing performance is good.
6. The valve body is made of stainless steel with good corrosion resistance, oxidation resistance and longer service life.
| DN | INCH | L | A | B | H | IS05211 | PN10 | PN16 | |||||
| m | in | Top Flange | φE | φF | n1-φd1 | φD | n-φd | φD | n-φd | ||||
| 50 | 2 | 42 | 128 | 64 | 9 | F05 | 65 | 50 | 4-φ8 | 125 | 4-φ18 | 125 | 4-φ18 |
| 65 | 2.5 | 45 | 135 | 85 | 9 | F05 | 65 | 50 | 4-φ8 | 145 | 4-φ18 | 145 | 4-φ18 |
| 80 | 3 | 45 | 144 | 95 | 9 | F05 | 65 | 50 | 4-φ8 | 160 | 8-φ18 | 160 | 8-φ18 |
| 100 | 4 | 50 | 163 | 101 | 11 | F07 | 90 | 70 | 4-φ10 | 180 | 8-φ18 | 180 | 8-φ18 |
| 125 | 5 | 53.5 | 189 | 117 | 14 | F07 | 90 | 70 | 4-φ10 | 210 | 8-φ18 | 210 | 8-φ18 |
| 150 | 6 | 56 | 203 | 130 | 14 | F07 | 90 | 70 | 4-φ10 | 240 | 8-φ22 | 240 | 8-φ22 |
| 200 | 8 | 59 | 243 | 168 | 17 | F10 | 125 | 102 | 4-φ12 | 295 | 8-φ22 | 295 | 12-φ22 |
| 250 | 10 | 65.5 | 268 | 202 | 22 | F10 | 125 | 102 | 4-φ12 | 350 | 12-φ22 | 355 | 12-φ26 |
| 300 | 12 | 76.5 | 313 | 239 | 22 | F10 | 125 | 102 | 4-φ12 | 400 | 12-φ22 | 410 | 12-φ26 |
1.Design and manufacture according to BS5155.
2. Face to face according to API609.
3. Flange drilling according to CLASS 150/PN10/PN16/10K.
4.Top flange drilling according to ISO 5211.
5.Pressure test according to API598.
